Specification Sheet

10Gtek Transceivers Co.,Ltd
Driving Your Next Generation Networks www.10gtek.com
E-mail:[e-mail] Tel: [phone] Fax: [phone]
6
2 Wire Interface EEPROM
The EEPROM on the SFP+ passive cable assembly is designed for 256 addresses. The
information for addresses 0 to 127 is listed below. This information can be tailored to any customer
request. Any address can be altered to display customer specific information and more memory
can be added if more addresses are needed. Addresses128 to 255 can be reserved for customer
specific information that is in addition to the SFF 8431 specification.
Mechanical Specifications
Mechanical
Parameter
Minimum
Typical
Maximum
Unit
Cable Diameter (24 AWG)
0.255
Inches
Bend Radius (24 AWG)
1.25
Inches
Cable Diameter (28 AWG)
0.185
Inches
Bend Radius (28AWG)
0.8
Inches
Cable Diameter (30 AWG)
0.175
Inches
Bend Radius (30 AWG)
0.7
Inches